richasebo.blogg.se

1. #Ilo 2 firmware dl385 g5 file update
2. #Ilo 2 firmware dl385 g5 file upgrade
3. #Ilo 2 firmware dl385 g5 file full
4. #Ilo 2 firmware dl385 g5 file password
5. #Ilo 2 firmware dl385 g5 file series

I stripped the server down to just the system board, one PSU, one CPU, one VRM (no drives, no drive cage, no RAID controller.), tried replacing the RAM CPU and VRM, and it still kept rebooting. Power backplane is fully redundant right up to where it plugs into the system board. I tried running the server with just one PSU and then the other, but it kept rebooting.

Server had dual PSUs attached to two independent power sources. (That didn't happen of course.) I ran HP diagnostics in a loop for days, and it never found anything wrong.

So this power cycle looked as if someone pressed and held the power switch to force the server off, and then pressed it again immediately to turn it back on again. Power loss would log "Power restored to iLO". A graceful reboot would log "server reset" instead. ILO logs reported "server power removed" and "server power restored" with identical time stamps on both events. Windows reported "previous system shutdown unexpected" and there were no other errors on the OS level. We replaced it with a spare machine, and I had the broken box all to myself to play with. Its a esxi box that Im prepping for something, the esx compatible updater is a joke.

#Ilo 2 firmware dl385 g5 file update

the SPP or PSP or whatever the heck its called is failing on the update, and it turns out I have to update it to 1.2 before going to current. We have one M元70 G4 that's been doing exactly that. I have several HP D元80 G7s that are on v1.1 of the ILO firmware.

#Ilo 2 firmware dl385 g5 file series

Has anyone else experienced something like this with a DL series server? If so, what solved the problem? Is there any way to increase the verbosity of the iLO log? If the iLO could log why the server is being reset, it would be enormously helpful. If this gives me nothing, I'll start from the other end, stripping out components of the guaranteed reset load until it doesn't reset.Īt the same time I would greatly appreciate any suggestions. I am slowly making my simple test scenarios more complex in an effort to make them resemble the load that is guaranteed to reset the server within a few hours. My next suspect was overheating (even if the room that it is in is well ventilated - air intake temperature is no more than 20C). When the reset happens the iLO log shows:Īt first I suspected HP's Automatic Server Recovery (a feature that automatically restarts the server if a watchdog timer isn't reset correctly by the OS). This leads me to believe that something else (for example the iLO system) is resetting the server - the trouble is that there is no indication of what would be doing this. There is nothing in Solaris' log files that indicate that the kernel has had a panic or that the OS has otherwise restarted itself. What I cannot figure out is why it is happening.

#Ilo 2 firmware dl385 g5 file full

This usage scenario involves full CPU usage and a fair amount of I/O on the EVA. I have been able to create a usage scenario that makes the non-production server reset within 2 hours. The production server has reset itself once or twice under normal usage. One of the servers is in production - the other is an identical failover that I can test on. I've been trying to grasp what exactly it is that is causing them to reset, but haven't really been able to narrow it down.Ī bit of background information: The servers run Solaris 10 and are used to serve files to approximately 1000 SMB/NFS clients. We have at least two HP D元85 G5 servers that reset themselves. SSH to iLO 2 could fail with clients running OpenSSH 6.2p1, OpenSSL 1.0.1e.Not so much big picture but I figured this would be the best forum to post in. Note: Last supported iLO 2 firmware version for p-Class servers is 1.82 as stated in the Customer Notice iLO 2 constantly rebooting after upgrading to version 2.12 or 2.15 on p-Class Blade Servers. iLO 2 Login webpage could display unsupported browser error message when using Internet Explorer 10. Option to switch between 'UHCI' and 'System USB' for iLO 2 Virtual Keyboard and Mouse was missing for HP ProLiant DL585 G5/G6 Servers. Virtual Media could randomly fail to mount in SUSE Linux Enterprise Server 11. Path MTU Discovery not working in iLO 2 versions 2.12 and later.

#Ilo 2 firmware dl385 g5 file password

The minimum password length setting could reset to zero from the previously set minimum length when MIN_PASSWORD tag isn’t specified in the XML script.

#Ilo 2 firmware dl385 g5 file upgrade

Upgrade your iLO license for additional functionality, such as graphical remote console, multi-user collaboration, video record/playback, remote management, and much more. iLO 2 firmware now includes the option to send a Gratuitous ARP on boot. Featuring the latest innovations in simplified operations, performance, and security, HPE iLO allows you to manage your entire server environment with ease.